Match the Angle
Place one arm against each surface and open the tool until both sides sit flush.
📐 Aluminum Miter Saw Protractor – Dual-Scale Angle Finder
📐 Aluminum Miter Saw Protractor – Dual-Scale Angle Finder
Regular price
$22.99
Regular price
$22.99
Sale price
$44.99
Unit price
per
BUNDLE & SAVE
Couldn't load pickup availability
📐 Aluminum Miter Saw Protractor – Dual-Scale Angle Finder
Regular price
$22.99
Regular price
$22.99
Sale price
$44.99
Unit price
per
Our Guarantee
Our Guarantee
You have 30 days to return your order if you're not
satisfied. No questions asked.
Fun fact: Out of every 1,000 orders, we only get about 5
refund requests. We're confident you'll love these as
much as we do, but if not, we've got you covered.
Measure the angle. Read the saw setting.
Stop Guessing Your Miter Angles 📐
Copy awkward corners directly, read the appropriate cut scale and move to your next step with more confidence—without stopping to calculate every angle by hand.
✓ Dual Cut Scales
✓ Adjustable Aluminum Arms
✓ Measure & Mark
The problem
One Wrong Angle Can Waste the Whole Cut.
Unusual corners and sloped framing can turn a simple project into repeated measuring, calculations and test cuts.
- Guessing which angle to enter on the miter saw
- Re-cutting boards that do not fit the first time
- Switching between multiple measuring and marking tools
A faster way to measure
Fit the Arms. Read the Scale.
Open the two arms until they sit against the surfaces you need to match. The center dial provides dedicated readings for a single-piece cut or a two-piece miter joint.
Less angle math. Fewer avoidable test cuts. A clearer path from measurement to installation.
Three simple steps
From Awkward Corner to Clear Cut Setting
Use the tool as a practical bridge between the jobsite angle and your cutting setup.
Choose the Scale
Read the Single Cut scale for one fitting piece or the Miter Cut scale for a joint.
Set, Mark & Cut
Transfer the measurement to the workpiece or use the reading to set your miter saw.
Two readings. One clear dial.
Know Which Angle You Actually Need
The high-contrast circular dial separates single-piece fitting from two-piece miter joints.
Single Cut
Use when one piece needs to be cut so it fits against an existing angled surface.
Miter Cut
Use when two pieces meet to form a miter joint and the total angle must be divided correctly.
More than a protractor
Measure, Transfer and Mark With One Tool
Integrated ruler markings along the arms help with basic layout work, while the slim hinged design reaches into common jobsite corners.
Aluminum BodyBlack aluminum construction with clear white markings.
Dual Scale DialSeparate readings for single and miter cuts.
Ruler MarkingsUseful for common measuring and layout tasks.
Hanging HolesOne opening at the end of each measuring arm.
Built for real projects
Useful Wherever Angles Refuse to Cooperate
Keep it ready for framing, finish work and everyday DIY projects around the home or workshop.
🏠 Wood Framing
📏 Baseboards
🪚 Trim & Molding
🚪 Door Frames
🖼 Picture Frames
🧰 DIY Furniture
🪵 Shelving
🔨 Renovation Work
Product details
What You’re Working With
| Product Type | Manual Miter Saw Protractor & Angle Finder |
| Material | Aluminum |
| Color | Black with White Markings |
| Scale Design | Single Cut Outer Scale + Miter Cut Inner Scale |
| Measuring Design | Two Hinged Adjustable Arms |
| Additional Markings | Integrated Ruler Markings Along the Arms |
| Power Required | None |
| Recommended For | Woodworking, Carpentry, Framing, Trim & DIY Projects |
Safety note: Confirm the reading before cutting, follow your saw manufacturer’s instructions and make a test cut on scrap material when fit is critical. Keep hands clear of blades and moving equipment.
Good to know
Frequently Asked Questions
What is the difference between the two scales?+
The outer Single Cut scale is intended for fitting one piece to an angle. The inner Miter Cut scale is intended for a joint where two pieces meet.
Does the tool attach to the miter saw?+
No. It measures the jobsite angle and gives you a reference setting to enter on your miter saw. Always follow the instructions for your specific saw.
Can it be used for inside and outside angles?+
The hinged two-arm design can be positioned against many common inside and outside corners. Make sure both arms sit flush before reading the dial.
Is it a digital tool?+
No batteries or electronics are required. Angles are read directly from the printed mechanical dial.
How do I care for it?+
Keep the pivot and scale free of dust and debris, wipe the tool with a soft dry cloth and store it where the arms will not be bent or damaged.
Measure Once. Cut With Confidence.
Bring the angle from the project to the saw setting with one compact, easy-to-read woodworking tool.
